Introduction to MOTHER-K: Bottle chapter

Compatible with all bottles, all the milk bottles lids in the straw cup series are compatible with each other, regardless it is the 200ml or 300ml, or different color ones. It is also compatible with the older straw cup series and can be purchased separately in case of missing or damages. The ergonomic handle is can also be obtained separately as well. Its wide and cured design fits snuggle into children's hands, reducing the possibility of them losing hold of the milk bottle.

Change from teats, to spout and straw cups. You can double up the bottle as a straw cup to teach your baby to drink from straw bottles. Changing to spout cup is also possible by removing the straw in the bottle. One cup with multiple uses.

PPSU materials are used to make the bottle, transparent, strong and durable. Unlike glass, it is a common medical device material and is much lighter than glass. It doesn't break upon repeated hard impact. Your bottle will survive from countless hard throw to the ground plus continuous washing and cleaning, without much change to its elegant exterior.

Boil to disinfect. The bottle body can withstand 200°C of high temperature, therefore is safe to be boiled for sterilization. The Straw is made of silicone and can withstand 120°C while the cap, screw, handle are made of PP and can withstand 100°C heat. Hence, the entire bottle is easy to sanitize.

Air pressure adjustable with the (+)cross-cut shaped valve. The valve can balance air pressure during drinking and prevent back-flow due to pressure differences. The reasons for back-flow are from the presence of hot and carbonated liquids or that there is too much air in the straw cups by capping cups too fast. To avoid back-flow and leakages, do not store liquid above 40°C in the bottle, press the air valve lightly from top to bottom to remove excess air, and pour contents in the straw cup slowly.

Replaceable spouts and straws are available. No more wastage of bottle simply from a broken straw. These replacement sets greatly extend the life of a milk bottle at little cost.

Combination of beauty and functionality. The sleek and simplistic bottle design makes the bottle intuitively user-friendly. Its polished and accurate threads allow for easy capping. The smooth surface and neutral color tone elevate the bottles to an artistic level. Pleasant to the eye, pleasant to drink from.

Compatible with all the other weighted cups of different capacities and colors. Even with older series as well. The handle is compatible as well.

Weighted Straw allows your baby to drink from any angle, sitting or lying down with no leakage. The weighted straw has replacement as well, so the cup is used for longer by simply replacing the old and worn straw. Straw in both 210ml and 300ml sizes are of the same length, easy to use them.

Tritan material is used to make the bottle, suitable for sanitation. The weighted straw and sealing ring are made of silicone and the weight is made of PP and stainless steel. The Cap, lid, handle, weight connector are made of PP. The Over mold part of the handle is made of TPE. All of these materials can withstand temperature from -20°C to 100°C. Though continuously boiling, steamed or UV sanitizing is not recommended so to avoid deformation.

One-touch cap for easy close and open. Easy to operate, perfect for little kids.